Vograce holographic stickers are the perfect way to add sparkle and personality to your favourite items.
Whether they’re decorating your laptop, water bottle, or phone case, their eye-catching shine and colorful designs make anything look amazing. But like anything else, your stickers need care to keep them looking their best over time.
In this guide, we’ll explain how to care for and clean your Vograce holographic stickers so they stay as vibrant and shiny as the day you first applied them.
1. Avoid Exposure to Extreme Conditions
One of the best ways to keep your Vograce holographic stickers in top shape is by protecting them from harsh environmental factors. Extreme heat, direct sunlight, and excess moisture can cause stickers to fade, peel, or lose their adhesive strength over time.
- What to do: If your sticker is applied to a water bottle or a car, avoid leaving it in direct sunlight for long periods. Similarly, avoid exposing your sticker to high heat, such as putting it near a heater or in a hot car for extended periods.
- Pro tip: Consider applying a clear protective layer over your sticker for items exposed to the elements, like water bottles. This could be a clear adhesive film or spray-on protective coating to help shield it from water and UV rays.
2. Clean Your Stickers Gently
Over time, your Vograce holographic stickers might collect dust, fingerprints, or smudges. But don’t worry! Cleaning them is simple and helps maintain their shine. However, you must be careful not to damage the sticker while cleaning.
- What to do: Use a soft, damp cloth to wipe down the sticker’s surface gently. You can use water or a very mild soap solution. Avoid scrubbing too hard, as this could damage the holographic finish or cause the edges to lift.
- Pro tip: For tougher spots like dried-on dirt, dab the area with a damp cloth and let it sit for a few minutes before gently wiping it away. This will loosen the dirt without you needing to apply too much pressure.
3. Keep Stickers Away from Abrasive Materials
Rough surfaces or sharp objects can easily scratch or damage the surface of your holographic stickers. Scratches will dull their shine and could even tear the material, so it’s best to keep them away from anything abrasive.
- What to do: Avoid placing objects like keys or sharp tools near items with stickers. For example, if your laptop has a holographic sticker, be mindful when tossing it into your bag with other objects that might scratch it.
- Pro tip: If you’re applying stickers to high-touch areas, like your phone case, consider using a case with a protective bumper or edge to shield the stickers from wear and tear.
4. Remove Stickers Carefully
If you ever decide to remove or reposition your Vograce holographic stickers, you’ll want to do so carefully to avoid leaving residue behind or damaging the surface. Though Vograce stickers are durable, improper removal could still result in tearing or sticky residue.
- What to do: Start by gently peeling the sticker from one corner. Use your fingernail or a flat tool, like a plastic card, to lift the edge slowly. Pull slowly and at an angle to reduce the chance of tearing.
- Pro tip: If you have trouble removing the sticker, use a little heat from a hairdryer on a low setting to loosen the adhesive. This will make peeling it off much easier and reduce the risk of damage.
5. Protect the Edges
The edges of stickers are often the first part to lift or peel over time. To prevent this, you can take a few extra precautions to help them stay securely attached.
- What to do: Once you’ve applied your sticker, press down firmly along the edges to ensure it’s fully adhered to the surface. Over time, if you notice any lifting, press the edges back down as soon as possible to prevent dirt or debris from getting underneath.
- Pro tip: If the edges start to lift after a while, you can use a small amount of clear glue or adhesive to stick them back down.
6. Avoid Harsh Chemicals
Harsh cleaning products can damage the holographic surface of your stickers and cause them to lose their shine. Stick to gentle cleaning methods and avoid abrasive or strong chemicals to keep them looking great.
- What to do: If you need to clean an item with stickers on it, avoid using cleaners like bleach, alcohol-based solutions, or any product with strong chemicals. Stick to mild soap and water; always use a soft cloth to clean the sticker’s surface.
- Pro tip: If you accidentally get a harsh cleaner on your sticker, rinse it off with water as quickly as possible and gently blot it dry with a soft cloth.
7. Handle with Care
Finally, one of the simplest ways to care for your Vograce holographic stickers is to handle the items they’re applied to with care. Whether it’s your laptop, phone case, or water bottle, being mindful of how you treat these items can go a long way toward keeping your stickers looking pristine.
- What to do: Avoid dropping or knocking around items with stickers. While Vograce stickers are durable, repeated impact or rough handling could cause them to peel or scratch.
- Pro tip: If travelling or on the go, use a protective case or pouch for your items. This keeps both your belongings and your stickers safe from accidental damage.
Final Thoughts
Taking care of your Vograce holographic stickers doesn’t require much effort, but it can make a huge difference in how long they last and how great they look.
By keeping them clean, avoiding harsh conditions, and protecting the edges, you can enjoy the shine and sparkle of your stickers for a long time.
Whether they’re decorating your laptop, phone case, or water bottle, these tips will help you keep them looking vibrant and fresh.
To get your own Vograce holographic stickers, head over to Vograce and grab an amazing discount today!